Dimlux Maxi Controller V1.2 & CO2 Sensor

Save Money with the Combined Maxi Controller and CO2 Sensor Kit

This money-saving deal pairs together the Dimlux Maxi Controller V1.2 and the Dimlux CO2 Sensor with a 5m or 10m Cable!

• Money-saving deal
• Maxi Controller & CO2 Sensor combo
• Accurately monitors CO2 levels in the growing area
• Also capable of regulating lighting, heaters and humidifiers

Using the CO sensor, the CO value near the plant can be read out from a distance and if necessary, CO can be dosed by the sensor. If the CO sensor is used together with the PT camera and the temperature sensor, the sensor will not dose any more CO if the plant temperature is too high.

There is a light cell in the CO sensor which measures whether the plant is in the day cycle. During the night cycle, no CO is dosed. The sensor must be hung at the height of the plant in a place where the light can fall on the light cell.

The sensor itself needs to be connected to a wall socket, and the cable with the data plug must be connected to the “C0” slot on the controller. A CO generator or a pressure-reducing valve with a valve for cold CO can then be connected to the power point in the sensor.

The Maxi Controller can adjust the output according to the ambient temperature: the lamps are dimmed automatically when the temperature exceeds a maximum pre-defined level. Using the DimLux with a Maxi Controller enables you to plug the DimLux directly into a wall socket without needing an intervening relay, time delay unit or time switch which saves you costs.